|
To upgrade PBXware from version 2.0 to 2.2 , you first need to update to the latest 2.0 version in the Setup Wizard->Updates. You then need to update HTTPD: Check to see if your PBXware has the gnap version of HTTPD by executing
cat /home/servers/httpd/sh/update
If your PROJECT line has httpd-2.x-gnap, do the following:
- cd /home/servers
- wget http://downloads.bicomsystems.com/httpd/httpd-gnap.tgz
- httpd/sh/stop
- tar -xf httpd-gnap.tgz
- httpd/sh/start
Otherwise:
- cd /home/servers
- nano httpd/sh/update
- change PROJECT line from PROJECT="httpd-2.0" to PROJECT="httpd-2.2"
- httpd/sh/stop
- httpd/sh/update with username=pbxware and password=update
- httpd/sh/start
Now you need to convert to Static/ODBC mode. To do that, go to the Setup Wizard->Configuration Mode (https://ip-addr:81/).
If that doesn't succeed, re-save the Server details and try again.
If asterisk and/or pbxware aren't started, execute
- /home/servers/pbxware/sh/pbxware dreload
- Do the following before updating:
- cd /home/servers/sitemanager
- nano sh/updates
- change PROJECT line to 'sitemanager-2.2'
- Save with CTRL+o and exit with CTRL+x
- cd /home/servers/pbxware
- nano sh/update
- change PROJECT line to 'pbxware-2.2'
- Save with CTRL+o and exit with CTRL+x
- Now you can proceed with the update, keeping in mind that whenever asked for username=pbxware and password=update
- cd /home/servers/sitemanager
- sh/update
- cd /home/servers/pbxware
- sh/update
- cd /home/servers/sitemanager
- sh/restart
- cd /home/servers/pbxware
- sh/pbxware restart
Check in Settings->About to verify that the upgrade went well.
|
